[skip to main content]

Plugs & Connectors

Theory


Connectors should let the signal through and not interfere with or affect it. Twenty years of research and development in this field has shown WBT how to design and manufacture products with little effect on signal transfer. Each plug and socket already has a transition point which must be overcome by the signal. Inferior connectors can act as a filter, which would then absorb all what you actually want to hear.

Products

  • WBT Lead Free Silver Solder

    WBT Lead Free Silver Solder

    Lead Free Silver Solder 0.9mm dia 42g Reel

    £20.00

  • Rothwell In-Line Attenuators

    Rothwell In-Line Attenuators

    Here's the solution to a problem from which far too many audiophiles suffer - too much gain in the system.
    The symptoms are easy enough to spot - the volume is plenty loud enough with the volume control set to the 9 o'clock position, too loud with the volume control at 10 o'clock, and fine control at low levels is impossible.
    This may seem like nothing more than a minor irritation, but in truth the performance of the system is being compromised. Although potentiometers work reasonably well over most of their operating range, they are notoriously problematic at extreme settings.
    The most obvious problem is channel imbalance - one channel will fade out (or fade in) quicker than the other, causing the stereo image to shift to one side - but on a more subtle level, the music may sound veiled and indistinct with the volume control turned down to the point where it is nearly off.

    £37.50

  • WBT 0660Cu Spades Kit of 4

    WBT 0660Cu Spades Kit of 4

    WBT spade connector suitable for larger-gauge cables (up to 10mm˛).

    £45.00